PS Audio Trio a 100 – Classe D

Mar 13, 2014 | Amplificatori mono a stato solido, P Amplificatori, P Magazine

Ps Audio modello Trio A front 3

 

Ps Audio modello Trio A logo

 

PS Audio Trio a 100

Quotazione: eur 450 / 550

PS Audio Trio a 100 – Power ampl. classe D . Marchio conosciuto per le sue amplificazioni in classe D, anche con questo modello da ben più di 100 watt per canale, la PS Audio conferma le sue prerogative realizzative.

La costruzione dual mono rende questo amplificatore particolarmente ben realizzato e con delle prestazioni di tutto rispetto a fronte del costo. La modernità progettuale e la buona capacità di pilotaggio sono i suoi due punti di forza.

 

Ps Audio modello Trio A front 2

PS Audio’s compact but mighty Trio A-100 delivers plenty of good, clean amplification to drive a high-quality two-channel audio system. It kicks out 100 watts per channel into eight ohms, and can double its output at four ohms to deliver a muscular 200 watts per side. That’s enough power to push most speakers with ease, and it’s ideal for today’s high-end speakers, which often run closer to four ohms than eight.

Ps Audio modello Trio A

Cool, quiet operation
Unlike typical amplifiers that generate lots of heat, the A-100’s high-efficiency switching output stages allow it to run surprisingly cool, even under extremely heavy loads. No fans or heatsinks are required on this beauty, so all you get is cool, quiet power.

Ps Audio modello Trio A back

Advanced technology for state-of-the-art sound
The ‘100’s dual-mono design maximizes stereo separation and reduces any possible interference between channels. Sharing only a common power cord, the two channels operate completely independently of one another, utilizing their own individual power supplies, input stages and power output stages. This gives you rock-solid imaging and a huge soundstage.

Ps Audio modello Trio A inside

The shortest, cleanest signal path
This amplifier employs two of PS Audio’s exclusive Gain Cell™ modules — one per channel. The Gain Cells serve as an input stage, where they help to eliminate potential noise or hum coming from your cables and provide a short, pure signal path for your music. You’ll experience effortless dynamics, transparent mids and highs, and deep powerful bass that’s certain to keep your toes tapping.

 

Ps Audio modello Trio A coppia

Per ascolti e info


 

email: sophoshiend@gmail.com


Bruno Fazzini – tel. + 39 347  1402138







Link ad altri argomenti che potrebbero interessare






       Usato                    Shop        






      Our Review            Our Music           Our Video               Our Systems






Quotes - Second Hand HiFi - Usato              The Best Hi-End in the World






MultiAmplificazione - Tutti gli articoli            Multicanale - Tutti gli articoli






Diffusori e ambiente domestico







      Evo Project - Reviews, Products and Systems






       Preamplifiers 


        Our Ranking, Le Nostre Preferenze


 




       PowerAmplifiers Under 10.000 EUR 


       Our Ranking, Le Nostre Preferenze


 




Seguici su     Instagram                     Seguici su     FaceBook




 


Specifications:

  • Configuration: Dual Mono

  • Class of Operation: D

  • Single-ended Inputs: 1 pair RCA

  • Balanced Inputs: 1 pair XLR

  • Input Impedance: 50 kΩ

  • Output Power:

    • @8 ohms: 100 watts

    • @4 ohms: 200 watts

  • THD: <0.1%

 

 

Features:

Overview: The PS Audio Trio A-100 is a 100-watt, Class D power amplifier with two-channel, dual mono configuration. It has a pair of RCA (single ended) inputs and a pair of balanced XLR inputs.

Impedance: The Trio A-100 can handle both 8-ohm and 4-ohm speakers with ease, and can drive loads even lower. The power output for 4-ohm speakers is double the output for 8-ohm speakers.

Inputs: The amplifier has both balanced XLR inputs and RCA inputs, giving you a choice of either type of input. Only one type of input can be used at a time. You must set the Input Select switch on the back to match the type of input you are using.

Ps Audio modello Trio A front 1

Bi-Amp: When using the A-100 to bi-amp a speaker, the switch on the rear panel is set to mono and only the left input is used.

Speaker Terminals: The Trio A-100 uses high-end gold locking binding post speaker terminals. These binding posts will accept bare wire up to 8 gauge, spade connectors, or single banana plugs. The terminals are spaced too far apart for dual banana plugs to be used.

Power Switch: The power switch is on the rear panel and there are no controls on the front. Typically there is a delay of approximately 2-seconds for the amplifier to turn on once the switch is pressed.

Illumination: When the power is turned on, a blue LED illuminates on the front panel.

Warranty Note: Out of the box the warranty is 90 days. If you register your purchase on PS Audio’s web site, the warranty is extended to 3 years.

 

ps_audio_a_100_2

 

http://www.audioasylum.com/forums/amp/messages/13/131007.html

Review by vickgeo@live.com on April 19, 2008

I notice there are as yet no reviews in this venue on this amp, and hardly any elsewhere. Since this is an interesting product, I am surprised such would be the case. My technical expertise is small, but I have been working on an evolving “Hi-Fi” system for many years, and have owned and used a large number of amps during that time, including two slightly different versions of the Trio A100. One was an apparently early version, and the other one current (so far as I know).
The features of these amps are well known: class D, dual mono, cool running, and biampable at the flick of a switch. Rated output is 150w @ 8ohms, 300w @4 ohms. And oh yes, inexpensive at a list of $995 each…

VIDEO